Opens in a new tab
common-mistakes-to-avoid-when-buying-new-windows

Common Mistakes to Avoid When Buying New Windows

At The Advanced Group, we sell windows on a daily basis. We've had plenty of customers in shop who have been let down by previous window suppliers and installers, that's why we've created this list to help you before you buy.

  • Zero Deposit

    Finance

  • 0% APR

    Representative

  • Interest Free Credit

    Up to 5 years

  • 15 Year Guarantee

    Peace of mind

Putting cost over quality – Guide from a double glazing Edinburgh team

Ask window companies to quote against the same list of openings, with matching frame finishes and glazing specifications. A lower total might reflect fewer opening sections or less finishing work.

You need those differences explained before you can judge value.

The description of the installation should be detailed enough to show what you’re paying for.

Check whether VAT is included, and whether the price covers taking away the old frames and glass, because a quote that leaves those out can look cheaper than it is.

Upstairs windows sometimes need access equipment, so ask whether that cost is in the total.

You don’t need to assume that an affordable quote means cutting corners, or that the highest price guarantees better workmanship.

Compare the specified products and fitting work to judge whether you’re investing in quality or paying for additional work.

Ignoring energy efficiency ratings and whole-window U-values

A U-value measures how readily heat passes through a window, with a lower figure indicating better insulation.

Check whether the quoted value covers the whole window. A centre-pane value describes the glass alone and excludes the frame and the edges of the glazing unit.

Ask for performance information that matches the window system you’ve been offered, including its glazing specification.

The figure on a brochure’s best-performing product may describe a different option.

Comparing double glazing with triple glazing

Our standard double glazing has a U-value of 1.4 W/m²K, and our triple glazing achieves 0.8 W/m²K for the whole window.

Ask us to identify the relevant specification on your quote so you can compare the cost of each option.

Triple glazing can reduce heat loss compared with double glazing under the same conditions.

Your potential energy savings depend on the existing windows and insulation, and how you heat your home.

When budgeting for lower energy bills, ask what assumptions a supplier’s estimate makes about your heating costs.

Forgetting about ventilation

Because replacement frames can reduce the airflow through gaps around your old windows, the survey should consider existing extract fans and background ventilation.

Moisture from showers and cooking needs a route out.

Trickle vents provide background airflow through a small opening in the frame or its surrounding assembly.

Discuss their position and the ventilation needed in each room before ordering.

Better glazing can make the inner glass surface warmer, but it won’t remove moisture from the air.

Persistent condensation needs an assessment of ventilation and moisture sources too.

New windows should form part of that assessment if damp is one reason you’re considering replacement.

Choosing the right window style for your uPVC frames

Before choosing windows for your home, check the proposed frame widths and divisions against your existing openings.

A different arrangement can change the amount of visible glass, the view from inside and the appearance of the front elevation.

Our window types include uPVC casement, top-hung, French and tilt-and-turn designs.

Inward-opening windows often need furniture or blinds repositioned to leave enough clearance for the sash. Handles must also be within comfortable reach.

Try an opening window in the showroom and ask how you’ll clean its outside face once it’s installed.

Compare a finish sample in daylight if colour matters to your decision.

We focus on uPVC rather than composite or wooden windows due to their low maintenance and high thermal efficiency.

Overlooking security features

Multi-point locking secures an opening sash to the frame at several positions when you operate the handle.

Ask which locking system is included and whether the window has internal beading, where the strips holding the glass in place sit on the room side.

Check any security test claim against the product being supplied, including its hardware and glazing.

A logo on a company’s website doesn’t establish the specification of every window it sells.

Where a window serves as an emergency escape route, discuss the opening mechanism and any locks or restrictors with the surveyor.

Security choices must allow the window to perform its escape function.

Ordering new windows before the technical survey

Rough measurements can help with an initial estimate, but the company should confirm the sizes and fitting details before it manufactures your windows.

The survey needs to establish the condition of the surrounding opening and how the new frame will meet the wall.

Raise any existing leaks, damaged sills or difficult access at this stage.

Ask whether further investigation is needed for anything the surveyor can’t inspect.

Confirm the opening directions and handle positions on the drawings to get it right the first time.

Check the colour on both sides of each frame. Approve the specification before manufacture starts to avoid costly changes to the sizes or opening arrangements.

Choosing the wrong window and door installer

Even the best windows can underperform if gaps around the frames are poorly sealed.

Poor installation can lead to water ingress and draughts at the connection between the frame and wall, so ask how the installer will finish that junction.

When reading reviews, look for how the company responded to faults after installation, such as a handle that needed adjustment or a reported leak.

Ask who will carry out your installation and who is responsible for resolving defects, especially if the company uses subcontractors for the fitting.

Before the job starts, agree how the fitters will protect floors and furniture, remove debris and leave each opening secure.

Record any agreed repairs to the surrounding finishes in the order.

Reading the warranty headline and missing the exclusions

Read the warranty terms for the sealed glass units, frames and moving parts, and check whether installation faults are included.

Look for any differences in the cover period between components. Labour and call-out charges also need to be clear.

Ask us for the terms of our 15-year window guarantee with your quote so you can read the cover, exclusions and maintenance requirements before placing an order.

Make sure to get a written copy of the guarantee after installation, and keep the contact details for reporting a problem with the guarantee document.

Letting window companies rush the decision

A time-limited offer still needs a written specification and a total price you can compare.

Request the expiry date in writing and read the order terms to make an informed decision on the offer.

Don’t sign a window order while details are unresolved, particularly the final sizes, payment stages or responsibility for extra work.

Ask how changes and cancellations are handled, and at what point the approved windows enter manufacture.

FAQ on window buying mistakes

Can I spread the cost by buying replacement windows in stages?

Discuss a phased order at the survey and ask for each stage to be priced separately. Return visits and access equipment can affect the total cost. Keep a record of the chosen profile, colour and handles, and ask about future availability if matching later replacements matters to you.

Should I replace a whole window if the glass has misted?

Misting between the panes can mean that the sealed glass unit has failed, while the surrounding frame remains serviceable. Have the frame, seals and hardware assessed before ordering a complete replacement. Moisture on the room-side surface is a different problem and needs its own assessment.

What should I check before the fitters leave?

Operate each opening window yourself and ask for a demonstration of any unfamiliar handles, vents or restrictors. Check the agreed finishing work and point out visible damage. Ask how to report faults that only become apparent later, such as a leak during rain, and keep a written record.

Common window buying mistakes to avoid at your survey

For expert advice on your window upgrade, bring the frame finishes and opening arrangements you’re considering to our Glasgow showroom in East Kilbride.

We can help you find the right fit for your home and discuss the glazing options at your survey.

For help avoiding these common window-buying mistakes, book your free home survey with The Advanced Group or call 0131 370 0444.

Glasgow Showroom

Visit Our Glasgow Showroom

See our high-quality items in person helps you make informed decisions. Our knowledgeable staff offers expert advice to ensure you find what you need.

Get Directions

Get a FREE Quote

It only takes 30 seconds!

By clicking ‘Send Now’ I consent to the Advanced Group’s data policy and allow them to contact me with the information provided above.

Glasgow Showroom

Get a FREE Quote

It only takes 30 seconds!

We fit thousands of homes every year, and customer service is at the heart of each and every job. Get in touch to see how we can fill your needs.

Start